When it's time to replace your 9-speed cassette, check out SRAM's PG-950 cassette. It delivers solid shifting and durability ride in and ride out for your 9-speed rig.
$25.00 - $33.00
When it's time to replace your old 8-speed cassette, check out SRAM's PG-850. Its steel construction and SRAM's PowerGlide technology combine to deliver miles of solid shifting and outstanding durability.
SRAM's E-BLOCK shifting technology is a fundamental redevelopment of external drivetrain shifting. On the E-BLOCK cassette, the chain has a defined link position on each cog. Cog architecture has been engineered to work with both inner and outer links of the chain, which allows extremely refined shifting for both inboard and outboard shifts. The result is precise and robust shifting performance in any situation, even with full motor support. - 11-48t, 8-speed cassette machined from case-hardened tool steel - Ideal mid-ship motor gear range - Increased chain wrap on climbing cogs - Symmetric shifting geometry allows fast, precise gear shifts - Optimal inboard and outboard shifting performance - The big steps between cassette cogs is a completely new cassette technology engineered specifically for the demands of E-MTB - Non XD driver body compatible - Gear Ratio: 11-48t - Recommended Group: EX1 - Cogs: 11, 13, 15, 18, 24, 32, 40, 48
$315.00 - $333.00
It's the final piece in the drivetrain puzzle, and paired with SRAM RED eTap and RED rear derailleurs, SRAM's XG-1190 cassette delivers ultra-fast, ultra-quiet shifts that will always put you in the right gear. - Compatible with SRAM RED eTap, RED, Force, Rival, Apex - Weight: 151 grams (11-25T), 185g (11-30T), 196g (11-32T) - Material High grade tool steel cog cluster, Heat treatment process, Heat treated aluminum lowest range cog, Elastomer rings - Speeds: 11 Gear Ratios: - 11–25: 11,12,13,14,15,16,17,19,21,23,25 - 11–26: 11,12,13,14,15,16,17,19,21,23,26 - 11–28: 11,12,13,14,15,16,17,19,22,25,28 - 11–30: 11,12,13,14,15,17,19,21,24,27,30 - 11–32: 11,12,13,14,15,17,19,22,25,28,32
$355.00 - $480.00
Campagnolo's Record 11-Speed Cassette has been expertly engineered for unparalleled shifting and maximum power transfer. Its largest 3 cogs are constructed from titanium for light weight, while the other 8 are made of nickel-plated steel for durability. Plus, the cogs are mounted on a light and rigid aluminum carrier, and the cassette is secured to the rear hub with a feathery aluminum lockring.
Campagnolo's Centaur Cassette offers precise, fluid shifting thanks to Campy's Ultra-Drive system. The teeth are carefully machined and treated for flawless gear changes and outstanding durability. Plus, the special cog patterns interface perfectly with the rest of Campy's drivetrain components for outstanding shifting.
• Stainless steel with high-polish finish • 1.37" x 24tpi right-hand thread • Requires a lockring (sold separately) • Compatible with 1/8-inch chains
$74.95 - $79.95
- Extended range aluminum cog for those wanting 1x10 with a full range of gears - Only fits Shimano XT/XTR 11-36t (M771/M980) or SRAM X5/X7/X9/X0 11-36t 10sp cassettes (not compatible with 2011 and older SRAM derailleurs) - Requires removal of the 17T or 15T cog and spacer from existing cassette - Longer B-screw (sold separately) only needed for about 50% of Shimano derailleurs - May require a longer 10sp chain. Very tight fit on Stans 330 rear hub splines - Designed and manufactured in the USA from 7075-T6 aluminum alloy
• Chromoly steel • CNC fabrication • 1.29" x 24tpi left hand thread
Machined from heat-treated, chrome-plated chromoly, these seriously tough cogs will hold up to massive track sprints and crazy skid-stops. Surly's Track Cogs are strong, shiny and they come in two widths and sizes from 13T to 22T so you can select the perfect gear.
SRAM's PG-730 7-Speed Cassette is the perfect replacement for your worn-out gears. It features a rugged steel construction for awesome durability and SRAM's PowerGlide technology for smooth, precise shifts throughout its 12-32 tooth range.
You've got to have the right ratio for the track, and Shimano's Dura-Ace cogs come in a range of tooth counts so you can always be prepared. Manufactured from durable chromoly steel, each cog is machined to run perfectly straight.
Shimano XT CS-M770 9-Speed Cassette - Aluminum carrier reduces weight and increases rigidity - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - Drivetrain Speeds: 9 - Weight: 323 grams
$60.00 - $75.00
Steel single sprockets with galvanized finish. - Lockring included - Cassette Body Type: Campagnolo 9 Speed - Drivetrain Speeds: 9 - Weight: 212 grams (12-23)
$100.00 - $120.00
While the greatest focus is generally given to the moving parts of the groupset, the drivetrain is not complete without the cassette. And a Campagnolo groupset is not complete without an extremely efficient, reliable and high-performance cassette. This is why the Centaur groupset offers high-quality solutions to meet the needs of even the most demanding cyclist. - Built with one steel triplet and 8 steel single sprockets. - Includes lockring - Drivetrain Speeds: 11 - Weight: 291 grams
Shimano Cassette Lockrings
Shimano Dura-Ace R9100 Cassette Spacers
$135.00 - $185.00
Steel sprockets with nickel-chromed finish. Built with one triplet and 8 single sprockets. - Includes lockring - 11-32t compatible only with mediumg cage rear derailleur - Cassette Body Type: Campagnolo 10/11 Speed - Drivetrain Speeds: 11 - Weight: 249 grams
The GC line of cassette extender cogs allow you to modify your 10 speed cassette into a wide range cassette. To achieve the optimal shifting, the GCs are optimized for Shimano or SRAM cassette. Compatibility: - Compatible with SRAM 10 speed cassettes - Compatible with all 10 speed rear derailleurs and chains - Note that you may need a longer chain that you currently have on your bike - Chain stretch should be less than .5 when installing a new GC - Can be run in 2x configuration with a long cage rear derailleur - These fit very tight on certain Stan's No Tubes hubs like the 3.30 and the Easton X4 hubs. With a little filing and some grease they will go on.
SRAM's PowerGlide PG-820 Cassette is a fine 8-speed cassette. It features steel cogs with SRAM's DuraBlast technology for smooth, precision shifting and excellent durability.
SRAM's PowerGlide PG-830 Cassette is a quality 7-speed cassette. It boasts durable chrome-plated steel cogs with SRAM's shifting technology that includes optimal tooth profiles and ramps for fast, precision shifts every time.
$22.00 - $24.00
- Chromoly steel with black oxide finish - 1.37" x 24tpi right hand thread - Requires a cog lockring (sold separately) - Compatible with 1/8-inch chains
Ridiculously strong and incredibly light, SRAM's XG-1180 11-Speed Cassette is a feat of engineering. Mini Cluster construction combines three small cogs that are CNC-machined out of a single block of billet steel with an additional eight cogs that are individually pinned together. Advanced tooth profiles and shift ramps produce quick, positive gear changes. The XG-1180 delivers SRAM’s trusted cassette design with a massively-wide gear range to tackle any terrain.
SRAM's 1050 10-Speed Cassette is a great choice. It's constructed of light and durable materials and boasts SRAM's PowerGlide tooth profiles and shift ramps for quick and positive gear changes every time. This trick cassette also sports a semi-spider construction for a maximum stiffness-to-weight ratio and is available in myriad configurations to suit all your riding. There are even models with 36-tooth largest cogs for super-easy climbing.
$420.00 - $555.00
For flawless shifting and maximum power transfer, Campagnolo brings you the Super Record 11-Speed Cassette. Its largest 6 cogs are constructed from titanium to save weight, while the other 5 are made of nickel-plated steel for durability. The cogs are mounted on a light and rigid aluminum carrier, and the cassette is secured to the rear wheel with a feathery aluminum lockring.
With its wide range, SRAM's XX1 11-Speed X-Glide Cassette gives you a clean, simple 1x11 drivetrain. It has a 10-42 tooth spread that gives you pretty much the same gearing as 2- and 3-ring setups without the REDundancy, shifting issues and weight penalty. Yes, you can still spin up your hardest climbs. A key thing to note, is that even with the huge range, there are no huge jumps or dips in the gearing, so your cadence and pedaling stay consistent as you move up and down the entire cassette. The wide open design makes it incREDibly lightweight and aids in mud clearance, giving you cleaner shifting and longer component life. It requires an XD driver hub freebody (sold separately) that further REDuces your wheel's weight and improves the hub connection. Welcome to the future of mountain bike drivetrains.
• Stainless chromoly steel with high-polish finish • CNC fabrication • 1.29" x 24tpi left hand thread
Featuring 10–24 gearing with two-tooth steps, the 7-speed XG-795 DH Cassette is optimized for the gear jumps that downhill riders want, eliminating the need for double or triple shifts. And because it’s so compact, it’s also light—the lightest cassette in existence, in fact, at just 136 grams. Compatible with any XD wheel, the Mini Block X-Dome technology integrates flawlessly with your SRAM 1X drivetrain. Going from zero to hero has never been faster.
SRAM's PG-970 9-Speed Cassette is the perfect replacement for your worn-out gears. It features a rugged steel construction for awesome durability and SRAM's PowerGlide technology for smooth, precise shifts.
When it's time to replace your 9-speed cassette, check out SRAM's PG-980 cassette. It delivers solid shifting and durability for your 9-speed rig.
Page 1 of 4 Next page